If the right LED blinks and it beeps, the printer is in the state unable to print. The beep pattern indicates the error cause.
LED blinks and the beep repeats two times.If the right LED blinks and the beep repeats, it indicates the paperless state. This error occurs when paper is run out or when you close the cover without pulling the paper out of the paper outlet a little. Replace the paper cartridge with a new one, or install the cartridge appropriately by pulling the paper out of the paper outlet a little.
LED blinks and the beep repeats three times.If the right LED blinks and the beep repeats, it indicates that the paper is jammed. In this case, open the cover, remove the jammed paper, and insert the cartridge again.
I closed the cover and LED blinks.If it beeps once and the right LED blinks, it indicates that the cover is left open. Close the cover fully until you hear the clicking sound.
It stopped printing and LED blinksWhen you print tens of sheets continuously, the printer head temperature may increase. In this case, the Nemonic Label printer automatically suspends printing to prevent overheating. At this moment, the right LED keeps blinking. If the temperature returns normal and the printer resumes printing, the right LED stops blinking.
If the right LED blinks and it beeps, the printer is in the state unable to print.
The beep pattern indicates the error cause.
This error occurs when paper is run out or when you close the cover without pulling the paper out of the paper outlet a little.
Replace the paper cartridge with a new one, or install the cartridge appropriately by pulling the paper out of the paper outlet a little.
In this case, open the cover, remove the jammed paper, and insert the cartridge again.
Close the cover fully until you hear the clicking sound.
In this case, the Nemonic Label printer automatically suspends printing to prevent overheating. At this moment, the right LED keeps blinking.
If the temperature returns normal and the printer resumes printing, the right LED stops blinking.